How To Turn Off Daytime Running Lights Kia Forte

Kia Forte: Daytime running lite

Daytime Running Lights (DRL) can brand information technology easier for others to encounter the forepart of your vehicle during the twenty-four hour period.

DRL can be helpful in many different driving conditions, and information technology is particularly helpful after dawn and before sunset.

The DRL system turns OFF when:

1. The position lights or headlights are ON.

2. The parking brake is practical. 3. Engine stops.

Lighting control

The light switch has a Headlight and a Parking light position.

To operate the lights, turn the knob at the end of the control lever to one of the following positions:

(ane) OFF position
(2) Parking light position
(iii) Headlight position
(4) Auto light position (if equipped)

Parking calorie-free position (
)

When the calorie-free switch is in the parking lite position (1st position), the tail, position, license and instrument panel lights will turn ON.

Headlight position ( )

When the light switch is in the headlight position (2nd position) the head, tail, position, license and musical instrument console lights will turn ON.

The ignition switch must be in the ON position to plow on the headlights.

Auto light position (if equipped)

When the light switch is in the AUTO lite position, the taillights and headlights will plough ON or OFF automatically depending on the amount of calorie-free outside the vehicle.

Never identify anything over the sensor (one) located on the instrument panel. This will ensure amend auto-lite system control.

Do non clean the sensor using a window cleaner, the cleaner may leave a light film which could interfere with sensor performance.

If your vehicle has window tint or other types of metal coating on the front windshield, the Auto light organisation may not work properly.

Loftier beam operation

To plow on the high beam headlights, push the lever abroad from you. Pull it dorsum for low beams.

The loftier-axle indicator will light when the headlight high beams are switched on.

To prevent the battery from beingness discharged, do not leave the lights on for a prolonged fourth dimension while the engine is not running.

Alarm - High beams

Do not use high beam when there are other vehicles. Using high beam could obstruct the other driver'southward vision.

To wink the headlights, pull the lever towards you. It will return to the normal (low-beam) position when released.

The headlight switch does not demand to exist on to utilise this flashing characteristic.

Battery saver function

The purpose of this feature is to foreclose the battery from being discharged. The system automatically turns off the parking lights when the driver removes the ignition central and opens the driver- ...

Turn signals and lane change signals

The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or downwards (A). The green arrow indicators on the musical instrument panel betoken which tur ...

Meet as well:

Cylinder Head Disassembly
Identify, valves and valve springs as they are removed so that each item can be reinstalled in its original position. ...

Replacement
[Removal]    � Put on gloves to protect your hands. � ...

Starter Clarification
The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the bombardment ...

Source: https://www.kifomanual.com/daytime_running_light_nbsp_-74.html

Share this post